How to root your HTC Wildfire

HTC Wildfire Tutorial : How to root your HTC Wildfire

This item was filled under [ Root & Hack ]

In the following, I will detail  ”How to root your phone“ customizing the guide for HTC Wildfire . Before we begin, I should mention that although there is little chance something bad will happen with your HTC Wildfire , you will assume all responsibility for any adverse events.
We will need:

(01) A HTC Wildfire  with at least half-charged battery, for not to have surprises.

(2) PC / laptop - this guide use Windows, but also for other systems will have the same procedure, except that there will be no drivers (in addition those with Linux already know what to do, and those who have the Mac are likely to have iPhone)

(3) Micro USB cable that came with the phone
    
(4) Unrevoked 3.21from    unrevoked.com
 
(5)AND  SELECT  DOWNLOAD unrevoked for wildfire s..

(6) HBOOT driversCLICK HERE
 
Once you are sure you have at hand the necessary above, we can proceed
 

1. Unzip the HBOOT driver .                                                                                             
2. Shut down the HTC Wildfire , then restart it by holding down the power button with the volume down. Together at the same time. The phone will start HBOOT menu. 

3. The phone will need to select USB HBOOT by pressing down the volume button four times, then the power button. Wait until the phone finishes displaying some messages “Checking SD”, otherwise, the phone will ignore commands.                                        

4. Connect your phone to the computer with the USB cable and wait for him to write HBOOT screen USB plug.                                 

5. Open ”Device Manager” (Start -> Right click Computer -> Click Properties -> Click on Device Manager)                                                                                               
6. Under “Other Devices”, you should now see ”Android 1.0″

7. Right click on “Android 1.0″, then click Update Driver Software.

8. Click on ”Browse my computer for driver software”.

9. Click on “Browse” and select the folder where you unzipped the drivers from step 1.

10. You should have a progress bar indicating progress … driver installation. If the warning message appears, click OK.

11. Wait for the installation is complete.

12. Click on ”Close” then make sure the item “Android Boot loader Interface”  is listed under ”Android Phone” in Device Manager.
After installing the HBOOT drivers , follow the instructions for phone root:
0. If you have not installed HTC Wildfire  Sync, install it. HTC Sync kit contains the proper functioning of some drivers needed Unrevoked(if not the drivers will get stuck in ”waiting for phone”).

1. Uninstall HTC Sync (or other programs that link directly to the phone, like DoubleTwist) , because we need only the Sync driver.

2. Run the file ”reflash_package.exe” that you downloaded from the site Unrevoked.

3. Tie your PC via the USB cable.

4. Pull the bar to notify the phone, select “Charge Only” and check”Do not ask this,” and click “Done”.

5. Press Menu, then Settings, then Applications, and Development, then select  ”USB debugging”.

6. Run Reflash.exe application (the folder where you unzipped “reflash_ package .exe” in step 2), 
then wait. The application will run only the root, and this time  the  phone will stop and start on its own. In theory, last no longer than 2-3 minutes.

 
And this is the right way How to root your HTC Wildfir


DISCLAIMER=

 I M NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS TO UR PHONE BUT IF U DO STEPS ABOVE CAREFULLY U WILL NEVER BRICK UR PHONE